In modern times energy is one of the most needed and valuable resources. However, the world strives to decrease the energy consumption in order to reduce the negative effect on the environment and to avoid overconsumption, which can lead to break downs in the electrical systems. The expenses of the companies, including those for electricity, are important priorities and the tendency in world scale is to reduce them as much as possible. We have to learn how to optimally use our resources and not let anything go to waste.

When it comes to energy saving, especially in companies, factories and other similar consummators, the goal is to achieve maximum efficiency with minimum energy consumption. A good way to do that is to make scheduled inspections on the most important and used systems and equipment. Maintenance and repairs have to be done, when necessary to keep the machines and the electrical network fully optimized. Thus failing of the equipment or troubleshooting will be avoided, and it will work at peak efficiency and will use less staff working time and energy.

The working schedule is good to be allocated, though it requires a small investment. The emergency repair teams have to be ready to react on the moment, but try not to cross their regular shifts with those of the normal staff. In case there is no emergency unit, an expert is needed to analyze the structure of the network and the allocation of the equipment and to make a plan. The costs for the expert are returned in no more than six months, so in long-term it is definitely worth it. Do not forget to make the maintenance schedules according to the manufacturers of the equipment to achieve maximum benefit. Generally there are four areas where the expenses can be reduced.

The electromechanical equipment is one of those areas. There is no need to mention that when it comes to electromechanical systems, everything might go wrong, which can result in energy waste or other kind of loss. A good way to prevent failures is to scan the equipment with a thermal imager. The possible problems can be revealed and avoided and if you can reduce the consumption of the motors with just 10% the overall energy consumption will be reduced up to 7%.

Electrical systems are another important part. Electrical components often brake, cables wear out, circuits may overload or the connection may be lost. The thermal imager again comes in handy and when done properly you can reduce the consumption with several kilowatt hours.

The power supply is probably the most important feature. Improper networks can significantly reduce the life of the equipment. Power quality analyzer can be used to track the condition of the network and the harmonic distortion. The losses are high if there is a problem with the power supply, therefore it has to be checked at all costs.

Seasonal utility check is strongly recommended. For a 10 square meter building the savings can reach up to 10,000 euros.

The Danish word for energy optimization of private buildings is energioptimering af private boliger. If this topic interests you, please pay a visit to this Danish website to learn more about it. To find out how green wind energy works, check out this article.